Yes, the BOLT Spare Tire Locks like part # BL5922986 will work with either the Fulton Hi-Mount Spare Tire Carrier part # FHDSTC0101 or the Fulton Hi-Mount Spare Tire Carrier part # FSTC1000301 as they both use 1/2-20" carriage bolts to secure the wheel. view full answer...
The Fulton Hi-Mount Spare Tire Carrier # FSTC1000301 is a great choice for a spare tire carrier. The bolt that holds the wheel onto the spare tire carrier is a 1/2 inch - 13 bolt that is 1-1/2 inches long. Since the bolt is smaller than 9/16 inches, the Tow Ready Spare Tire Lock # FSTL0603 will work well with the spare tire carrier. This spare tire lock will keep the wheel secured to the spare tire carrier. I've attached a review video of this lock for you.
The Wheel Lock Set # RG01-150... view full answer...
Wheel Lock Set for 1/2" Wheel Bolts (2 Locks, 1 Key) Item # RG01-150 could be used with a 1/2 inch bolt to hold the spare to the Curt Trailer Hitch Mounted Spare Tire Carrier Item # C31006. Or, even better, use Spare Tire Lock Item # e98892 which comes with a lock and key and the bolt. view full answer...
Technically yes, the BOLT Spare Tire Lock # BL5922986 will lock onto a boat trailer's spare tire and will hold up to possibly being submerged. The problem you will run into is the lock is designed to fit into the recessed well that you won't normally find on trailer wheels. If you use the lock on a wheel where the entire lock is exposed it would be fairly easy for a would-be thief to get to the lug nut and spin it off by hand.
A better option for your trailer's spare tire might be the... view full answer...
I've looked through our spare tire locks, and have seen that we don't offer one that uses a J-bolt. Fulton offers an inexpensive carrier/Lock solution, part # FETCSTL0701 that would allow you to attach and lock a spare tire onto your trailer frame. You can see the rest of the spare tire carriers and locks we offer by clicking the provided links. view full answer...
The locking attachment is not sold separately. To get the wheel and the locking attachment for your MicroSport XT trailer you will need The Spare Tire for Malone MicroSport Trailer # MPG465.
This spare tire has a galvanized finish that will help it withstand the elements better then the other spare tire # MPG469. It will be an upgrade.
The wheel and tire has a load capacity of 1,230 pounds at 65 psi. It has a load D with a ply rating of 8. The lock is not included with the lockable mounting... view full answer...
Yes, the Fulton Spare Tire Lock, part # FSTL0603, that you have referenced, will fit on the Fulton Hi-Mount Spare Tire Carrier, part # FSTC1000301.
The bolts that are used to hold the wheel onto the Fulton spare tire carrier are 1/2-inch size bolts. The Fulton spare tire lock will fit on a wheel stud up to 9/16-inch diameter. view full answer...
As long as you have a spare tire carrier that has 1/2 inch diameter threads this will work well for you. The Spare Tire Carrier Lock # FETCHL07020 is designed to fit the most common stud diameter found on spare carriers, which happens to be 1/2 inch diameter. This is what your spare carrier should have and I'd be honestly surprised if it did not, so it should work really well. view full answer...
To secure your spare tire to the Brophy Rigid Mount Spare Tire Carrier # BR56VR I recommend using the Tow Ready Spare Tire Lock # FSTL0603 which will go over the stud and lock the nut on to the trailer.
The metal construction of the # FSTL0603 makes it so it cannot be just broken off of the carrier.
I included videos for both of the products mentioned for you to take a look at. view full answer...
As long as the wheel stud of your Honda CRV's spare tire carrier is no larger in diameter than 9/16 of an inch and the lug nuts are less than 1 inch tall, the Fulton Spare Tire Lock, # FSTL0603, will work for you. This lock has a tab that is placed behind the lug nut of your spare tire and then the lock is placed over the lug nut. The enclosed and locked lug nut prevents the wheel from being stolen or removed without a key.
If you have 1/2 inch diameter wheel lugs, another option you may... view full answer...
If the wheel stud of the spare tire carrier is no larger in diameter than 9/16 of an inch, the Fulton Spare Tire Lock you mentioned, part # FSTL0603 should work just fine for the spare tire on your Wrangler Unlimited. view full answer...
The etrailer Spare Tire Lock part # e98892 that you referenced can lock a spare tire to it's mount but I can't guarantee it would lock your spare tire rack to your spare.
For a standard hitch lock that would work great on a Curt 2 inch hitch the # e98882 would be a great option. This lock is stainless steel too so it will resist corrosion. view full answer...
Basically what the etrailer.com Spare Tire Lock # e98892 does is act as a lug nut that secures the wheel to the trailer so that if someone were to try and remove the wheel they'd not be able to loosen the lock unless they had the key. Check out the review video I attached for this lock I attached to this page as well. view full answer...
The thread size of the U-bolt of the Fulton Economy Spare Tire Carrier # FETCSTL0701 is a very standard size of 1/2-20 so the Bolt Spare Tire Lock part # BL5922986 would easily fit if you wanted. view full answer...
It does appear to have a mount under the trailer for your spare. It looks like you just need to use some bolts and then use a lock like the Spare Tire Carrier Lock # FETCHL0700 to secure it.
Many times when there is not a mount, you would use the Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 which can work, but is intended to go around a frame so would have extra length on your application. view full answer...
You can lock your spare tire to the CE Smith Spare Tire Carrier # CE22007Z-11050-2. All you need to do is add the CE Smith Padlock Brackets for Spare Tire Carriers # CE26002Z-2 which will allow you to use a padlock, the Master Lock # ML1KA to lock your spare tire.
These brackets simply thread onto the carrier so you can use the padlock to help secure the tire.
I've added links to video reviews of both the carrier and brackets for you to check out. view full answer...
I have another option for you, but unfortunately we do not have any locking lug nuts that fit the Demco Spare Tire Carrier # DM15853-52 you were looking at. This carrier has threaded studs that are 1/2" in diameter with fine threads which are different than standard 1/2" x 20 studs used on a trailer so a standard lugnut will not work.
To lock you spare tire to the carrier I recommend using the Spare Tire Lock # FSTL0603 has a tab that gets installed behind the nut and then the cover will... view full answer...
We do have a spare tire lock that can be keyed alike, but the Tow Ready Spare Tire Lock # FSTL0603 cannot be keyed alike.
Our etrailer.com Spare Tire Lock # e98892 can be keyed alike. Just click on the keyed alike option and choose the quantity that you would like before adding this item to your cart. view full answer...
The etrailer Spare Tire Lock for 1/4" to 7/8" Thick Rims # e98892 is actually a rebrand of the DeadBolt lock so this is the exact same thing. We don't make it in any other size though so if this isn't long enough you'll need a different solution like a cable lock you can wrap in and around the spare tire and your trailer frame. If you want to go this route I recommend the 10' Long etrailer Cable Lock # e98891. view full answer...
According to my research, the wheel studs on your Wrangler Unlimited are 1/2 inch diameter, which means that the Lock # FETCHL0700 should work just fine for you.
Our etrailer.com lock # e98892 would also work if your spare tire has at least 3/4 inches of clearance behind it, and you have an available lug opening that passes through the carrier on the vehicle. view full answer...
Go To Results